Cisco® 1100 Series Integrated Services Routers (ISRs) with Cisco IOS® XE Software combine Internet access, comprehensive security, and wireless services (LTE Advanced 3.0 wireless WAN and 802.11ac wireless LAN) in a single, high-performance device. The routers are easy to deploy and manage, with cutting-edge, scalable, multicore separate data and control plane capabilities.
The Cisco 1100 Series ISRs are well suited for deployment as Customer Premises Equipment (CPE) in enterprise branch offices, in service provider managed environments as well as smaller form factor and M2M use cases.
Note: Not all 1100 series SKU variants are available in every region with different technologies (check on CCW pricelist for your region).
Specifications
Ethernet WAN | Y |
DSL WAN | N |
SIM card slot | N |
3G/4G USB modem compatibility | Y |
Networking standards | IEEE 802.1Q,IEEE 802.1ag |
Ethernet interface type | Gigabit Ethernet |
Ethernet LAN | Y |
Cabling technology | 10/100/1000Base-T(X) |
Ethernet LAN data rates | 10,100,1000 Mbit/s |
Static route | Y |
VLAN support | Y |
Multicast support | Y |
Port forwarding | Y |
Frequency range | 2.4 - 5 GHz |
Mobile network generation | 4G |
Short Message Service (SMS) | Y |
ADSL | Y |
ADSL2 | Y |
Web-based management | Y |
Quality of Service (QoS) support | Y |
Ethernet LAN (RJ-45) ports | 8 |
Gigabit Ethernet (copper) ports quantity | 8 |
Fast Ethernet (copper) ports quantity | 1 |
Power over Ethernet (PoE) ports quantity | 6 |
Installed SFP modules quantity | 4 |
USB ports quantity | 1 |
USB version | 3.2 Gen 1 (3.1 Gen 1) |
Switching protocols | RFC 2338 |
Routing protocols | VRRP |
Data link protocols | HDLC |
Management protocols | IGMPv3 |
DHCP client | Y |
DHCP server | Y |
IPv4 & IPv6 features | Dual stack IPv4/IPv6 |
Supported network protocols | ACL, NAT, QoS, BFD, VRF Lite, IP SLA |
Supported protocols | IPv4, IPv6, RIP, RIPv2, OSPF, EIGRP, BGP, IS-IS, IGMPv3, PIM SM, SSM, RSVP, ERSPAN, IPSLA, EEM, IKE, ACL, EVC, DHCP, FR, DNS, LISP, HSRP, RADIUS, AAA, AVC, DVMRP, MPLS, IPsec, L2TPv3, BFD |
Security algorithms | 3DES,128-bit AES,256-bit AES,DES |
Firewall | Y |
Authentication method | RSA (748/1024/2048 bit), ECDSA (256/384 bit); Integrity: MD5, SHA, SHA-256, SHA-384, SHA512 |
Access Control List (ACL) | Y |
Network address translation (NAT) | Y |
Flash memory | 4000 MB |
Internal memory | 4000 MB |
Internal memory type | DRAM |
Certification | UL 60950-1.and EN 60950-1. CAN/CSA C22.2 No. 60950-1. CB to IEC 60950-1, 2 |
Product colour | Grey |
Wall mountable | Y |
LED indicators | Link, Status |
Antenna type | External |
Antennas quantity | 2 |
Detachable antenna(s) | Y |
Power consumption (typical) | 66 W |
Power source type | AC, PoE |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Output voltage | 12 V |
Power over Ethernet (PoE) | Y |
Operating temperature (T-T) | 32 - 104 °C |
Storage temperature (T-T) | -4 - 149 °C |
Operating relative humidity (H-H) | 10 - 85% |
Storage relative humidity (H-H) | 5 - 95% |
Operating altitude | 0 - 3000 m |
Non-operating altitude | 0 - 4570 m |
Width | 323 mm |
Depth | 244 mm |
Height | 44 mm |
Weight | 1.94 kg |
AC adapter included | Y |
Manual | Y |
Quick start guide | Y |
Package type | Box |